Jump to content

Articles

  • entries
    4
  • comment
    1
  • views
    17,561

Contributors to this blog

Dental Amalgams (Fillings)


kamurj

121 views

 Share

Excerpted from
Discover Wellness
By Phyllis Taber-Greenberg

1. My Opinion Of Possible Problems:

a. a. If one's dental fillings (amalgams) are metal, especially mercury-silver, they could be causing severe mental and physical health problems. My problems were OBESITY and emotional. There is a mountain of evidence collected by dentists/researchers around the world that substantiate this claim. The American Dental Association does not agree. They say that the mercury-silver dental fillings (amalgams) are safe. I will present you with some of the evidence and directions to obtain more information, along with my personal experiences and testimonies from other people, and you make up your own mind.

2. My Opinion Of Possible Solutions:

b. a. Have all of the metal fillings (amalgams) removed and replaced. Replacement materials vary with different dentists but non metal ones are basically porcelain, and composite material.

3. Books:

c. a. It's All In Your Head by Hal A. Huggins, D.D.S.

d. b. The Cure for All Diseases by Hulda Regehr Clark Ph.D., N.D.

4. People And Products:

e. a. Dr. Huggins's Office, 1-866-948-4638.

Sells the detox supplements to detox the body of mercury.

f. b. Peak Energy Performance Laboratory, 1-800-331-2303.

Does the blood tests for your bodies compatibility to material that can be used in your mouth.

5. My Experiences And Opinions:

I started taking Dr. Huggin's supplements to remove the stored mercury from my cells in May, 1991. The change in my mental and emotional states were astounding. Each month I got better and better. My memory returned and my depression left. My energy increased and my anxiety decreased. My entire personality was changing. What a joy! I had blood and urine tests taken to record the loss of mercury. The blood test confirmed the amount of mercury that was being dumped into my body each day and the urine test confirmed the amount that was being excreted due to the Huggin's supplements. I was excreting more mercury than I was taking in. To be exact, the test indicated that I was taking in .5 micrograms of mercury and excreting 5.0 micrograms. After a few months the changes in myself were so enormous that I made up my mind then and there that I wanted this to be a permanent change in my life. The only way to insure that was to have all of the mercury amalgams removed.So, I called the Huggin's telephone number and asked for a Dentist referral in my area. Also, having interviewed a variety of people for this book, I had several referrals of my own.

I then proceeded to call all of the dentists and interviewed them over the phone. Either talk to the dentist or someone in authority in the office to elicit the information that you desire. Do not go in for a consultation until you have done this. First of all, the consultation will cost you money. Secondly, you don't even want to use a dentist that is not using the proper protocol for mercury removal. I had read the book Its All In Your Head and knew the Huggin's protocol by heart. I also knew that improper removal of the mercury could cause serious and permanent damage to my health. The Huggin's protocol for mercury removal was taught by Dr. Huggins in his Colorado clinic to those dentists that were interested in learning the methodology. Dr. Huggins stopped placing mercury amalgam fillings in his patients' mouths in 1973. He is recognized as one of the leading authorities in the world on mercury amalgam removal. Huggin's protocol for mercury removal was as follows and these are the questions that you want to ask the dentist or his receptionist over the telephone BEFORE you waste your time or money on a consultation: (This was the protocol when I had my amalgams removed in 1992. New technology and research might have changed it).

1. Electro Ferese Machine (EFM) - Does the dentist have one in his clinic? The EFM is designed to attract errant mercury atoms that escape into the environment while amalgam removal is taking place. Generally, the EFM is attached to the ceiling of his work station. This is very important, as you do not want to absorb these escaping atoms into your body via inhalation, etc. When you do go in for a consultation, ask to visibly see this machine.

2. Air Exchange Machine (AEM) - This usually sits on the floor in the work station and physically exchanges the air in the room several times per hour. You should actually see the AEM to ascertain the dentist is in compliance with the Huggin's protocol.

3. Rubber Dam - This is a square piece of rubber that is placed into your mouth as a safeguard against mercury pieces and/or vapor being swallowed or absorbed during removal. The rubber square is about half the size of a Kleenex tissue and is laid over your open mouth and kept in place with wire frames that fit outside your mouth around your lips. The dentist puts pressure on the rubber around the tooth that he is going to work on so that the rubber breaks in that spot only, adhering firmly around the tooth. That leaves only the tooth to be worked on exposed, effectively protecting the other teeth, tongue, throat and mouth with the rubber dam. While it is difficult to explain, the procedure is quite painless and absolutely necessary. I would not let a dentist touch me for mercury extractions if he did not use this exact procedure.

4. Water Exchange - Constant water/air suction should be used during removal to insure that all of the mercury is immediately removed from your mouth, thus eliminating any chance of absorption from mercury vapors.

5. Sequential Removal - The dentist should have a machine that reads electrical current in your mouth. This machine is called an Amalgameter. It reads positive and negative electrical current in microamps. A ground is placed in your mouth and a probe is touched to each tooth which has a filling in it. The tooth will either have a positive or negative reading. Sequential removal means that amalgams are removed in order, according to the electrical charge. For example, the quadrant having the highest negative reading is done first, moving to the quadrant with the lowest negative reading. Then, the quadrant having the highest positive reading is done moving to the quadrant with the lowest positive reading on the Almagameter. COMPLETE RECOVERY IS SELDOM ACHIEVED IF THIS PROCEDURE IS NOT FOLLOWED EXACTLY. A quadrant is a fourth of your mouth. You have the upper left teeth forming one quadrant, the lower left another. The upper right and lower right form the additional two quadrants. After each amalgam extraction, resetting of the current has to be done because the fields change.

When I had my current tested it indicated I had a total of 80 microamps. The current test sheets for myself and my husband are in the back of this book.

Dr. Voll of Germany has said that there should be no more than six microamps of current in anyone's mouth. He has also said that the acupuncture meridians in the body are adversely effected by any current greater than six microamps and that this aids the process of disease. Picture these meridians as guitar strings running from the bottom of your feet to the top of your head. There is concern about negative current at one microamp. It has been said that some of the dramatic improvements seen in some people after amalgam removal is due to the changes in their electrical field due to the removing of the negative fillings along with getting rid of the mercury.

6. Protamine Zinc Insulin (PZI) - Be sure that the dentist uses a shot of PZI with each quadrant of amalgam removed.

7. Immunization Cycle - Avoid having all appointments on the same day of the week in order to avoid interfering with the 21 day immune cycle. I had mine removed one quadrant a day for four consecutive days. On Monday one quadrant of amalgams was removed and on Thursday the fourth one was removed.

8. Dycal - Make certain that the dentist does NOT use Dycal as a base. Dycal causes electrical current to be generated just as the metals do. All metals, including gold, cause electrical current fields in the mouth. To eliminate these fields, you must eliminate all metals.

9. Do not take vitamin C on the same day as mercury removal takes place because it reduces the pain killing action of the Novocain.

Amalgam Removal

Now that we've covered the things that you must interview your dentist on, let's cover the things that you must do to have the best results from your amalgam removal.

1. Dietary changes are important. This includes the elimination of caffeine, sugar, and alcohol from your diet, and of course, smoking. I believe that organic, raw, fresh fruits and vegetables are necessary daily to achieve and maintain optimal health.

2. The taking of supplements to remove the mercury stored in your tissues and brain cells. These supplements can be purchased from Dr. Huggin's office. Also, several doctors recommend chlorella as a good detox method. There are several other ways to detox, see #20, Detox Body and #21, Detox Brain.

3. As per author, the taking of Aloe Vera Gel. See subject #3, Aloe Vera.

Now, for the final aspect of this procedure. What do you replace the mercury/silver amalgam with? To this question, I am happy to say, there are good answers.

To begin with, there is a blood test. You can call Peak Energy Performance Laboratory in Colorado (1-800-331-2303) and they will send you a kit. You can have the blood drawn locally, then mailed overnight to Peak Energy Performance laboratory in Colorado. They analyze the blood and will give you a list of the replacement materials that you are compatible with. The procedure was called a Compatibility Panel 307 in 1992. The results are given to you and you can take them to your dentist who then, collaboratively, helps you select the best replacement materials for your amalgams. When I did this, the test revealed that I was very compatible with a white filling material called Conquest. This is a white, ground-glass powder mixed with a plastic binder. There are several different name-brands of materials similar to Conquest, but my blood test indicated I was least reactive to the chemical components in Conquest (Post Comp II by Generic Pentron).

As I stated earlier, do not let the dentist use Dycal as a base for the filler in your teeth. The best results overall are with a base called Dropsin. A "base" is a coat of insulation usually placed over the pulp chamber where the nerve lives to decrease the thermal shock of hot and cold sensitivity. Now, for the crowns. If the hole that is left in your tooth after the amalgam is removed is going to be too big, then a normal "filling" will not be suitable. It will not "hold". In this case, you will need either a crown or an inlay. At this point you have four choices, of which, in my opinion, two are good and two are bad ones. Let me explain the good and bad of all four choices: The four choices are pure porcelain, porcelain over metal, gold, and cast glass. Please remember that these are my opinions and these choices were available in 1992. There might be new materials on the market that are better today.

1. & 2. Porcelain and Porcelain over metal- Porcelain was my choice. Porcelain comes in two ways;

a. Pure porcelain bonded to your tooth

b. Porcelain on top of metal (metal is 86% pure gold) cemented to your tooth.

Since I don't believe in using metal of any type in one's mouth, even gold, I chose the pure porcelain. As you have learned in this book, gold does give off an electrical charge and you will have an electrical field in your mouth if you use it, although according to experts it is a very low field. Also, you NEVER mix gold and mercury/silver amalgam in a mouth, not even for one day.

The downside for pure porcelain is two-fold. Porcelain is not as strong as metal/porcelain crowns. Heat and cold sensitivity lasts longer due to the fact that porcelain is simply bonded to the tooth while metal/porcelain crowns have a metal and cement base that adds a "buffer" separating the nerve in the tooth from heat and cold.

There are many different brands of porcelain. Since aluminum is an ingredient in porcelain, you must be careful to use one brand of porcelain only. Research data on the brand "Di Cor" shows a 100 to 500 thousand year half-life in aluminum leakage. In other words, you don't have to worry about it in your lifetime because it will take a minimum of 100 thousand years for half of the aluminum to leak out of the porcelain.

3. Gold - The third choice is gold. A good point about gold is that it is the strongest choice, a bad point is that it will create an electrical field in your mouth which can be harmful to your health according to experts.

4. The fourth choice is Cast Glass. This is probably one of the best materials, but it is not strong and the crowns can break and crack with hard usage.

Taking everything into consideration, I elected to use pure porcelain and I have been happy with the choice. I have absolutely no electrical field in my mouth and the sensitivity to hot and cold diminished in a short time.

Everyone is different with their level of tooth sensitivity. I have talked to people who hardly notice a sensitivity at all while others had varying degrees of sensitivity. In my case, sensitivity was acute for several months, though within nine months it was barely discernible. It has been several years since I had my crowns put in and there is no sensitivity at all. I have been told that I am the exception to the rule, that most people don't have as much sensitivity as I experienced.

In the back of this book there are copies of the electrical testing that was done on my mouth on the day of consultation and each day of amalgam removal. Your dentist MUST check the electrical fields each time you come in for amalgam removal because the fields can change from quadrant to quadrant. This is part of the sequential removal procedure discussed earlier. Also, in the back of this book is a copy of the electrical testing conducted on my husband. The electrical field in his mouth tested at 97 microamps. It took him many years to make up his mind concerning removal, but I am happy to report that in August of 1998 he finally had them removed and also did subsequent detoxing of body and brain. During my mercury/amalgam extraction I also supported my adrenal glands by taking pantothenic acid and vitamin C. I took this combination for months prior to the extraction, but eliminated the vitamin C on the mornings scheduled for extraction, electing to take it in the afternoons (recall, vitamin C decreases the effectiveness of Novocain) and I continued taking it for some time afterward. I also added a freeze-dried adrenal gland supplement which I took before, during, and after amalgam removal. It just seems to me that since the adrenal glands are so sensitive to stress, that I should support them to the best of my ability during the extraction process. The stress on the body is tremendous at that time.

One more bit of information. My amalgams were removed in January of that year, but I didn't start losing weight until three months later, in April. From April until August, I had lost 20 pounds. I believe the delay was the time necessary for the Pineal to recover from 30 years of "shell shock" in being bombarded with electro-magnetic fields. There is probably a time of adjustment and repair necessary for it to start functioning properly.

I must add here that the process of extraction was absolutely painless!!!! I never had one uncomfortable moment. And, my energy level was high and my mental condition, i.e., emotional stability, etc., was excellent. I think it was partially due to the adrenal support and the liter of Aloe that I drank daily, consuming four liters in four consecutive days of extraction. At that time I was taking Coate's Aloe which comes in liter bottles (33.8 oz. in a liter Vs 32 oz. in a quart). From laboratory reports, at that time, I knew that Coate's Aloe had between 1500 and 2500 mg./L of the healing ingredients I sought, therefore, one liter each day was adequate. If I had been taking R-Pure Aloe, I would have had to only take three ounces per day, as R-Pure Aloe guaranteed, at that time, 448 mg. per ounce of the healing ingredients. My goal was to consume a minimum of 1200 mg. of Aloe's healing ingredient per day.

Choosing a Dentist

In ending this chapter, I would like to expound on the importance of selecting the dentist. The dentist that removed my amalgams is in West Palm Beach, Florida, and his name is Dr. Medlock. He was trained by Dr. Huggins and is a very sincere, conscientious person. Working with him and his staff was a pure delight. The staff always greeted me with an upbeat, happy attitude and demonstrated the utmost concern for my safety and comfort.

Dr. Medlock's knowledge and input helped me tremendously in deciding on the proper crowns for my teeth. Thanks to his desire for continuing education, a recent seminar he had attended provided him new-found information on using the Di Cor porcelain.

Not long after I had finished my extractions, Dr. Medlock returned from another seminar on mercury extraction where he discovered a substitute for the rubber dam. It is a combination drill and semi-rubber dam all in one.

I would like to take this opportunity to thank him again for the safe, successful mercury extraction that I experienced. He has also been helpful in providing me with some of the necessary names and techniques listed in this book, not to mention his critique of this subject for accuracy.

See the back of this book for the tooth chart, "The Teeth and the Body." This chart shows the relationship between each tooth and a corresponding body part. I thank the American Academy of Biological Dentistry for permission to print this chart.

Now, the last reference I am going to make in this topic occurred on December 16, 1990, on national television. Sixty Minutes, the popular television show, did an expose on mercury amalgams. I have the transcript of the show. Anyone can order it by calling Burrelle's Information Services at 1-800-777-TEXT, OR Journal Graphics 1-800-825-5746, or write to Journal Graphics, 1535 Grant Street, Denver Colorado 80203-1843. The television segment is entitled "Is There Poison in Your Mouth? To order it you must request it by date and segment title. I highly recommend that you order this transcript and read it. The contents are mind boggling. The following information is excerpted from the transcript with permission from CBS.

---- Copyright, CBS Inc., 1990. All Rights reserved. Originally broadcast in December, 1990, over the CBS Television network and affiliates ----

Morley Safer: "Is there poison in your mouth? The American Dental Association says there isn't, but some of its members say there is and have stopped using it. Mercury is more poisonous than lead or even arsenic.

Because its been around so long and because it was assumed that the mercury was made stable when mixed with other metals, amalgam fillings were never tested for safety - one of those remedies that the Food and Drug Administration automatically approved, but now a growing number of scientists, doctors and dentists are saying silver amalgams should be banned. Last summer, the EPA banned mercury from indoor latex paint because of mercury vapor. The vapor level in this patient's mouth after chewing for 10 minutes is 92 times higher than the mercury-vapor level in a newly painted room - three times higher than the U.S. Government allows in the work-place.

A number of medical schools are looking at the relationship between mercury vapor in the mouth and a whole variety of diseases. Alzheimer's, arthritis and colitis have all been linked to mercury poisoning. Mercury in the work-place has produced kidney damage, brain damage, birth defects and symptoms of multiple sclerosis. Up until seven years ago, the ADA said no vapor at all was released from fillings. The ADA is adamant that mercury in a patient's mouth is safe - so adamant that in 1986 - it changed its code of ethics. It became a violation of that code for any dentist to recommend the removal of amalgam because of mercury.

The Inclusion of the "Is There Poison In Your Mouth?" Television script does not imply endorsement of the author's editorial content therein.

By changing its code of ethics the ADA can now charge a dentist with fraud, get expert witnesses to testify against him, and revoke his license. Therefore any dentist that speaks out against mercury dental amalgams could lose his license and livelihood! And, it HAS BEEN DONE. Please read the 60 minute transcript to find out more.

I end this chapter on a note of sadness. It has been called to my attention that the panthers of the Everglades of Florida, an endangered species, are being killed by mercury poisoning. There are only a few dozen left in the Everglades and recently several have died. Panther No. 27, as the 4-year-old female was called, had a higher mercury level in its body than did victims of history's most notorious mercury poisonings, at an industrial town in Japan.

If mercury in the environment is this deadly, think about having a toxic waste dump in your very own mouth, spewing out vapors every second of every day that you live, and for that matter, long after you die.

I hope this chapter has helped to enlighten you, to open your eyes to the lies that are being fed to you concerning the SAFETY of mercury amalgams. It's your physical and mental health that are being destroyed. It's you that is being cheated out of the full enjoyment of life which can only come hand in hand with a healthy, robust body and mind. I made my decision, and I had all of my mercury amalgams removed in January of 1992.

For those of you with any doubt as to mercury's dangers, I would recommend that you read a book called "Beating Alzheimer's" by Tom Warren. It is listed in the back of this book under the section entitled, Recommended Books to Read. Tom Warren was diagnosed as having Alzheimer's disease and for six years he and his wife searched for answers to beat his INCURABLE disease. "Beating Alzheimer's" is his own true story, and in his book, Tom devotes an entire chapter to mercury fillings.

The November 11, 1988, issue of Dental and Health Facts News Letter, published by the Foundation For Toxic Free Dentistry, reports that a group of researchers at the University of Kentucky found increased mercury in Alzheimer's brain tissue.

The Stortebecker Foundation for Research, in Stockholm, Sweden, reports that the high concentrations of metallic mercury found post-mortem in the brain originate mainly from the mercury in dental amalgam fillings. However, far more dangerous are similarly released mercurial fumes, which settle in the mucous membranes of the upper region of the nasal cavity and are then transported directly to the brain. A silver filling is composed of five dissimilar metals: 50 percent pure elemental mercury, 35 percent silver, 13 percent tin, two percent copper, and a trace amount of zinc. When these dissimilar metals combine with saliva, a battery effect occurs. Studies indicate that an electrical current accelerates the release of hazardous mercury vapor.

A research paper entitled Dental "Silver" Tooth Fillings: A source of Mercury Exposure Revealed by Whole-Body Image Scan and Tissue Exposure and written by Leszek J. Hahn, et al, published on August 28, 1989, by the Departments of Radiology and Medical Physiology, University of Calgary, Alberta, Canada. It ended all speculation about the stability and dangers of mercury silver fillings by reporting what happened when radioactive mercury-silver fillings were placed in the teeth of adult sheep. Mercury appeared in high concentrations in the sheep's' kidneys, livers, jaw tissue, and gastrointestinal tracts. In each animal, it was found in lower concentrations in the frontal cortices, occipital cortices, thalami, cerebrospinal fluid, pituitary gland, thyroid and adrenal. It was found throughout their whole bodies - within twenty-nine days.

I have read, from knowledgeable sources, that many of the chemical imbalances found in people are created by reactions to toxic substances in the mouth. They include mercury, copper, nickel, beryllium, aluminum, molybdenum and other metals found in fillings, crowns, braces and removable bridges. Plastic fillings contain phenol, hydroquinone, formaldehyde, boron, strontium, urethane and toluene. These are just a few of the chemicals that people are exposed to from these fillings. Even "gold crowns" contain notable amounts of copper, palladium, silver, tin and zinc in the non-biological, or metallic forms which can react with our bodies. These metals and chemicals can combine with your hemoglobin where oxygen is supposed to travel resulting in the experience of chronic fatigue. They can combine with your hormones such that your blood test may look "normal" yet the hormones are not fully active due to contamination from some of these metals. They can attach to normal cells in your body and make them register abnormal, or "nonself" to your own immune system. When this happens, your white blood cells will start to destroy those "non-Self" cells thinking they are invaders. This creates what is called an autoimmune disease. Examples are Diabetes, Multiple Sclerosis, Lupus, Arthritis, Lou Gehrig's Disease and many others.

Electro-Magnetic Pollution

1. MY OPINION OF POSSIBLE PROBLEMS:

a. a. Electricity and its subsequent electro-magnetic fields can cause fatigue, headaches, and cancer to grow.

2. MY OPINION OF POSSIBLE SOLUTIONS:

b. a. Remove your body from electro-magnetic fields, especially at night when you sleep. Quantum Products from Unified Technologies can be used to "cohesify" the electro-magnetic fields and neutralize the negative effects of the electricity in your home, car, office, computer, etc. and thereby make the fields less damaging to your body.

3. BOOKS:

c. a. Cross Currents by Robert O. Becker, M.D.

d. b. Electromagnetic Pollution Solutions (What You Can Do To Keep Your Home & Workplace Safe) by Dr. Glen Swartwout.

4. PEOPLE AND PRODUCTS:

e. a. Unified Technologies. They sell the products that "cohesify" the electro-magnetic fields and neutralize the negative effects of the electricity in your home, car, office, computer, etc. I have all of them.

f. b. Tools for Wellness. They sell the TriField Meter to meter the electro-magnetic fields, radio and microwave fields in your environment and The Personal Polarizer. I speak about the Personal Polarizer under "My Experiences & Opinions."

5. MY EXPERIENCES AND OPINIONS:

When I finished my research on electromagnetic pollution and assimilated the knowledge, I believed that I had found the missing piece to a vast puzzle. There are so many causes of diseases but I now believe that this ranks at the top of the list. Unfortunately, the idea is in its infancy and although the existing research is overwhelming, the proper authorities are ignoring it and the medical profession does not even know that it exists.

The most illuminating book to read on the subject is Cross Currents, by Robert O. Becker, M.D. Once you read this book, you will never be the same again nor will you live the same way anymore. I know I didn't. This book is an in-depth study on the problem with splendid references and convincing test data.

Another excellent book for quickly recognizing what is causing electromagnetic problems and what to do about them is Electromagnetic Pollution Solutions, by Dr. Glen Swartwout. This is a short, concise, easy to read book. I recommend both very highly and I think that they are a must read for any one trying to defend themselves from disease, or, if presently fighting a disease, trying to attain good health. Personally, I don't believe excellent, robust, vital health can be attained in an environment filled with electromagnet pollution. It seems that the very nature of it causes the immune system to break down due to overwhelming stress. In my opinion it is a "silent" killer because, to us all of these years, this insidious process has been diligently causing harm to our bodies on a 24 hour a day basis.

The only protection you have is to educate yourself and try to keep out of harms way. The government and big business, by their very capitalistic nature, will never correct this problem. Furthermore, we are all reliant on electricity, from our televisions to our computers, and I for one do not want to give up the conveniences. So, the answer is to identify the problem and protect yourself. And protect yourself you can with the wonderful products from Unified Technologies. I have been using their products since November, 1991. They have literally changed my life. At this point I must say that I have tried some of the competitors products and not only did they not work, but they made me sick. So I can only recommend this one product as I know that it works and I am still using all of the products to date of this publishing in 2002.

So, by now you're probably saying, "What is electromagnetic pollution?" Let me attempt to answer that for you. Facts show that every electrical appliance and power line produces an electromagnetic field that radiates out from it creating a field around the appliance or power line. That field is called an electromagnetic field. Also, every T.V. and radio signal that our devices in our homes receive has been transmitted there by means of a similar field given off by the transmitting station. All of these unseen fields has resulted in the unseen contamination of our environment with electromagnetic fields that are man made and never before existed on our planet earth. Our bodies were designed by the Creator to co-exist harmoniously with the natural frequencies and energies emanating from the natural sources of this universe and our own planet.

Energy is contained in each electromagnetic field produced by these various man made devices.

The TV pictures on the receiver set in our homes are produced by the conversion of the energy of the signal given off by the station's transmitter into electrical energy in the antennas. While we sit watching TV, our bodies are receiving the same energy, as well as the energy from multiple other transmitters from other TV and Radio stations, including but not limited to radar devices, electrical transmission lines, short- wave frequencies, etc. It is probably true that at this time there is no place on this planet that is free from man made electromagnetic contamination. The exposure of living organisms to all of these man made electromagnetic fields results in many abnormalities in function and physiology.

This planets electromagnetic field before 1900 was composed of its own field and its associated micropulsations, such as lightning and visible light.

We cannot change or eliminate the military intelligence installations, the T.V. towers, the radar stations, the telecommunication radio relay and carrier facilities, satellites and mobile telephones, etc. But we can protect ourselves once we have the knowledge of how to do it. There are many electromagnetic fields in our homes and work places that are within our control. They can be identified and we can protect ourselves from them.

It has been said by researchers in this field that Electromagnetic pollution can cause an Electromagnetic Stress that disrupts the metabolism because it penetrates the tissues of the body. Because electromagnet fields are invisible, odorless, tasteless, and silent, they usually go unidentified as a source of stress. From this point on I will use the abbreviation for electro-magnetic field which is EMF. Also the letters ELF are the standard to denote "extra-low- frequency," meaning a very low electromagnetic wave in the range of 0 to 100 cycles per second. Our residential electricity operates on 60-Hz (Hertz) which is 60 cycles per second, therefore it falls within the ELF frequencies. 60 cycles per second is the exact speed necessary to prevent our eyes from seeing a light bulb continuously flicker.

What about the ELCTRICITY in your mouth created by metal dental fillings? Dental amalgam fillings set up a readily measurable direct flow of current between fillings with associated positive and negative magnetic poles. The DC (+) positive magnetic pole encourages microorganism replication. In addition, the magnetic field can provide sufficient positive energy to interfere with biological energy in general and brain function in particular. See subject #24, ELECTRIC FIELDS IN MOUTH for further information and the three chart readings of the electrical current in the mouths of myself and my husband at the back of this book.

The micro-amp reading from the amalgameter in the dentist's office is a reading of electrical current in your mouth (due to fillings, etc.). Since it falls between 0 and 100, for purposes of this book, I am calling it an ELF, though this may be technically incorrect since the F in ELF represents "frequency", i.e., wave, speed, cycles per second. The electricity in the mouth is probably a "static" current, not moving in waves (at least not in cycles). A micro-amp is one millionth of one amphere. An ampere is a unit of current strength. Since electricity flows from negative to positive, the flow in your mouth would cause an electromagnetic field, EMF, to be generated also.

ELF fields can be natural fields from either the interaction of the Sun's energy and the Earth's magnetic field or human-made ones. I have read in research articles that the ELF field could change the operations of the pineal gland and possibly the magnetic organ, but the changes would be reflected in alterations in chemical messengers, i.e., melatonin and serotonin.

NOW FOR MY THEORY - The pineal gland gives chemical messengers to the entire endocrine system, including the thyroid gland. If an ELF field can alter or interfere with this process and cause interference with normal thyroid chemical messengers, doesn't it stand to reason that the result of that could be or lead to being over-weight? Isn't it also possible that the ELF produced in the mouth of people with metal fillings could be enough to accomplish this alteration? This is just my theory, but after 30 years of not being able to lose weight with the metal fillings in my mouth and then, to have them removed and start losing weight three months later, appears to be more than simple coincidence. For me, it is empirical fact.

You see, we are energy beings with our own electrical system in our body. Modern medicine uses that system when it employs the EEG (to read brain waves) or attempts to balance our electrolytes or uses the EKG to read heart waves. We have meridians of electricity that run from the top of our heads, through our teeth, to the tip of our toes. See the chart in the back of this book labeled "The Teeth and the Body, Energetic Inter-relations." The metal in our teeth interfere with the meridian's path, and attracts the electricity to form a field around the metal. This is totally unnatural and does not belong in the mouth. Surely, God did not intend for us to walk around with a large electrical field in our mouths. Severe disturbances can be caused due to the close proximity of the ELF to the glands in the head or neck area and the brain. The hypothalamus, pineal gland, pituitary gland, thyroid, and parathyroids are all located close to the mouth. Dr. Voll of Germany recommends against the presence of more than six microamps of current in one's mouth. Further, he cautions us about the presence of negative current at one microamp. When my metal fillings were tested I had an electrical field of 80 and my husband had 97 microamps!! I had four and my husband had 20 microamps of negative current!!!

Now, lets talk about the EMF produced in your homes. Physics shows us that "any flowing electrical current produces a magnetic field in the space around it", and most homes are loaded with EMFs. For example, lets take your television, lamp, VCR, radio, electric clock, etc. All of these things have a long wire extending from the appliance complete with a plug at its end. The plug is intended to complete the circuit, connecting the appliance to the free-flowing electricity. Once you insert the plug, i.e., make the connection, the electricity flows into the wire, stopping at the appliance unless it's control switch is turned to the "on" position. (While power might not go through the unit in the "off" position, the magnetic field is not stopped by a switch. The magnetic field still radiates from the wire whether the appliance is on or off. It is this "flow" that produces a magnetic field in the space around it or along the length of the wire and if the wire is rolled up, knotted, etc., the situation is much worse as it increases the "field" more than normal. Since turning "on" an appliance only lets the power operate the appliance, but does not prevent the "field" from forming, every wire, i.e., appliance in your home is generating a EMF constantly, 24 hours each day. Since these are 60 Hz. fields, they would be considered ELF. Stop reading for a minute and mentally count how many electrical gadgets are plugged-in at this moment, all at one time, and in your home! Each one is giving off an EMF, and if it is too close to your body, it is interfering with your body's own intrinsic electrical field. Also, if the wire is close to any kind of metal the electricity can jump to the metal and electrify it (charge it). Examples are aluminum products, i.e., windows, window shades, siding, and furniture, as well as the metal coils in your bed via mattress or box springs or metal bed frames, etc. Some of the worst things you can sleep on are an electric bed, a water bed with an electric heater, or under an electric blanket.

The October, 1991, issue of Health Consciousness magazine carried the first of a four-part series written by Wolfgang Maes of Bau-Biologie fame, entitled Stress From Current and Radiation: The Sick Bedroom and its Successful Treatment. The following interesting story is accredited to Wolfgang Maes and printed here with his permission.

"A case study come to my mind. It refers to a particularly "delicate" new approach: beds which you can adjust with an electrical motor. A dentist slept in such a luxurious model and had racking pains in the spine, migraine headaches, dizziness and heart attacks for years. The bed was not enough. He added an electric heating pad. He was now sleeping in a huge electrical field. Even when the bed and pad were turned off he was still in this field as long as the plug for the two devices were connected to the electrical source, i.e., plugged in. While this client was lying on the bed I measured 35,000 millivolts at his body. Imagine, 35 volts in his brain, heart, lungs ... everywhere. After removing the bed and pad plugs we found "only" about 600 millivolts in the persons body. The reason: Defects in the cables of the bedroom wall. Now the instruments measure zero millivolts at the body level. The client called after a few weeks: The unbearable pains had subsided gradually and eventually completely disappeared."

So, according to Wolfgand Maes' story, the client had a three-fold problem. His first solution was to stop using his electric bed, and second, his heating pad. Third, not only did he have appliance problems but he also suffered due to faulty wiring in the wall, necessitating a cut-off switch to stop the flow of electricity from the fuse box to that wall.

The second story from Wolfgang Maes that I found interesting is:

"A thoroughly healthy, vital person about 40 years old became extremely ill within a few short weeks. The ambulance came every other night. The man despaired because the doctors could not find anything wrong. When going to the hospital the dangerous symptoms abated every time.

Upon returning home the illness reappeared again; heart attacks, circulation disruption, mysterious and intolerable pain. The person was incapable of making any sensible thoughts any longer. Fear and depression entered his life. Again, the first physician was called as the client was convinced he would die soon.

I took a measurement of this person, lying in his bed, and my meter registered 155,000 millivolts, i.e., a total of 150 volts!

The reason for this problem: The electrical heating unit of his water bed was defective. After repairing the unit, the fields did not reappear. This sporting and dynamic gentleman was filled with new life and vigor. The ambulance did not have to come again."

Now, let's touch on mental illness briefly: It seems that mental health, depression, suicides, alzheimers, etc., have been rising at a rate in proportion to the increase of electromagnetic fields appearing in homes and workplaces. According to research evidence there does seem to be a direct link between suicide, depression, and functions of the pineal gland.

I have read that It seems that there may be two types of clinical depression: one that is produced by some external psychosocial factors, and one that is produced by some external factor that influences the production of these psychoactive chemicals by the pineal gland. It is possible that that external factor could be electromagnetic fields. Whether it is ever proven to the satisfaction of a myriad of doctors and scientists or not, I will accept the fact that all of the above could be true and protect myself. After all, I am the one that will benefit, and I have.

Now, I have my own personal story to add. In 1976, my parents-in-law, Ben and Martha Greenberg, made a retirement move to Florida. A few months subsequent to arrival and their moving into a new home, they purchased an electrically controlled bed. They proceeded to sleep in this king-size, dual controlled, bed every night and also lay on it most evenings while watching TV. Both of them were in excellent health. In 1982, Ben died of cancer. He had been diagnosed six months earlier. IT IS A KNOWN FACT THAT IF YOU HAVE CANCER IN YOUR BODY, ELECTRICITY WILL CAUSE IT TO GROW. That was proven by Dr. Wendell Winters of the University of Texas who had been contracted by the New York Department of Health to investigate the effects of 60-Hz fields on cells of the immune system. He reported that cancer cells increased their rate of growth by several hundred percent with only a 24 hour exposure, and that, apparently, this growth rate was thereafter permanently maintained. Further work carried on outside the confines of the New York State Study by Winters and his colleague, Dr. Jerry Phillips of the Cancer Research and Treatment Center in San Antonio, Texas, led to several publications in reputable, peer-reviewed, scientific journals. At this time, the scientific evidence is absolutely conclusive: 60 Hz magnetic fields cause human cancer cells to permanently increase their rate of growth by as much as 1600 percent and to develop more malignant characteristics.

Sadly, Ben's passing due to cancer is not the end of this story. Martha continued to sleep on that electrical bed, and in 1991, was diagnosed with Alzhiemer's Disease.

The irony of this is ...g uess what kind of beds are used in hospitals? I am not saying that electric beds are causing illness and disease. I am just writing the research that I have read and telling of my own personal opinion and experiences. In my opinion if one wanted to use an electric bed, one should unplug it from the wall after the position one wanted was attained. That way the current would be broken between the bed and the electricity feeding the wall plug. A simple solution one can take upon one's self to protect one's self or one's loved one. I'd rather be safe than sorry. . . .

In view of the above case histories, whose outcomes are evidenced by established scientific thought, my personal theory has evolved. I believe the EMF disturbing the pineal gland can also come from amalgams in your mouth. After all, the electric field in the mouth is a permanent 24 hour per day exposure to radiation, bombarding the brain, the pineal, pituitary, thyroid, and parathyroid glands. Also, if the pineal (the master gland) is not giving the right chemical messengers to the rest of the endocrine system, then any gland in the body can become dysfunctional. So, not only do you have EMF that are man-made to be concerned with, but you also have the man-made field (EMF) permanently installed in your own mouth. Your T.V. or electric clock can be moved away from your body, thus removing the EMF from your physical being, but you can't take the metal and "move" it out of your teeth in order to remove the field from your body. You're stuck with that field permanently, unless you go through expensive, permanent dental removal and replacement with non-metal. Now, lets talk about man made EMF fields. What is a healthy distance from electric powered appliances and their corresponding EMF's? I follow the following information: FAN, 3-6 feet; CLOCK, 6 feet; COMPUTER, 6 feet; TELEVISION, 6 feet for a smaller screen; COPY MACHINE/LASER PRINTER, 6 feet, LAMPS, 1 foot and no wires should ever go under the bed or under or behind a couch or chair that you sit on constantly.

Of course, the best way is to buy a Trifield meter and meter everything for yourself. The best book to read to get all the facts on distances is Electromagnetic Pollution Solutions. Even the office of Technology Assessment of the Congress of the United States recommends a policy of 'prudent avoidance' of man-made electromagnetic fields.

Now, if you're interested in measuring these fields in your house, car, shopping malls, airplanes, etc., there is a wonderful meter being sold that does the job extremely well. You can purchase it through TOOLS,INC. It is called a TriField meter. The instrument meters EMF's in milligauss.

You walk up to the appliance that you are testing with the meter pointed directly at it. Turn the appliance to the "on" position and you will see the instrument's needle go all the way to the end of the red zone on the scale, as high as it can possibly go. Now, start backing up from the appliance, keeping your eye on the needle. As you put distance between you and the appliance, you will see that the needle slowly goes down. When it reaches zero, you are out of the EMF.

Now, there is something called the Ambient Field (AF) and is produced by the local electric power transmission and distribution network (electric power lines). It is a field that we are constantly exposed to inside and outside of our homes. The studies of Wertheimer, Savitz, and others indicate that residential exposure to ambient fields more than three milligauss are related to increases of childhood cancer. There is good evidence that such fields may also be associated with adult cancers. Here are a few incidents to consider. These articles are from pages 62, 63, and 69 of Health Consciousness Magazine, December 1991, article by Wolfgang Maes, Part two of four, Bau Biologie, Stress from Current and Radiation, reprinted here with permission from Wolfgang Maes.

"Four years ago, the electric company of Houston, Texas, was required to pay compensation of more than 25 million dollars to a private school. The courts determined that a high tension line over the school campus was a health hazard for more than 3,000 students. The judges also required the company to move the line.

After continuous pressure from the people in the Canadian province of Manitoba, the power supply company agreed to buy all of the homes adjacent to a 100 mile long, high-tension line to avoid damage claims. In Italy, in 1988, a district court in the province of Torrino ordered a 380 kilovolt high-tension line moved and warning signs erected, adjacent to the new line.

Near Madrid, Spain, two small towns, San Sebastian and Alcobendas, were crossed by two gigantic high- tension lines. After the building of these bussing giants, numerous health complaints began to emerge. Mysterious diseases, more cancer than ever, and leukemia, appeared in these towns. The first local scientific investigations indicate a significant relationship to the electric towers.

A study ordered in 1982 by the U.S. Navy provided some sound statistics: Alternating electrical and magnetic fields which exist in most living, sleeping, and working rooms can produce may types of cancer, malformations in children, and even suicides.

Research by a number of scientists leads to the conclusion that there is a relationship between the mysterious, sudden death of babies (4,000 babies in Germany) and electromagnetic fields.

The clinical studies of three physicians, Monro, Choy and Smith, clearly show that fatigue and extreme headaches are directly related to modest electro- magnetic fields to which we are exposed in the house-hold and our working places. Electromagnetic fields could also be the basis for most allergies.

Five hundred thousand people, who were regularly exposed to strong electromagnetic fields, have been examined in the state of Washington. It was found that 60 percent of them showed a higher rate of leukemia and 75 percent, a higher rate of lymph gland cancer in comparison to a control group without such exposure.

In Sweden, Tomenius, a Swedish researcher, examined 45 families with high electromagnetic loads. Thirty-two children living there have cancer.

From France, three scientists; Dutrus, Martinez and Fole, made laboratory experiments with young students. Electromagnetic exposures generated noticeable changes in heart activity, disorders of the central nerve system exhaustion, lack of motivation, headaches, ...whenever the stress from electricity was stopped, without knowledge of the test person(s), the complaints of the eight students disappeared and their mood brightened.

From Germany, Professor Feindegen, from the Institute for Medicine in Julich, has experimented with mice and found that an enzyme which is in charge of cell metabolism had its activity slowed down by 80 percent under strong EMF exposure. Within minutes after the EMF was removed, the enzyme activity came to normal. The scientist, Professor Feindegen, also found a similar relationship for radiation from radioactivity."

The last example cited here upholds my theory of EMF's from your mouth disrupting metabolism of fat and therefore causing chronic obesity. From page 68 a continuation of the article by Wolfgang Maes.

"Don't be fooled by the argument that the earth gives off electromagnetic fields and that we have lived with these EMFs from the beginning of time:

This argument conceals the fact that artificial electromagnetic fields from high-tension lines have nothing in common, in quality or quantity, with the natural terrestrial magnetic field. There is no comparison possible! The power from the Earth is without any frequency. That means it is static. It has balanced, harmonious field strengths. It has obviously positive consequences for all life - during the millions of years of its development. It stimulates all of the natural processes in a miraculous way. It is part of our order and quality of life. The magnetic power from electric current works with a frequency of 50 or 60 hertz. It has an unbalanced, disharmonious, and always heavily changing, field strength - from minute to minute and from day to day. It is a brand-new part of our modern world and is a totally artificial disorder of life."

So much for examples and scientific data. I have three interesting personal experiences that I can share with you. The first one concerns my friend Diane, who was also the president of D.A.M.S. in this area. She had mercury poisoning and had her amalgams removed. She went through all of the necessary detoxing and rebuilding of her immune system. But, she never had a problem with the electromagnetic pollution. Luckily for her, electrical emanations did not seem to bother her. Then, she went to have her TMJ treated. He made her a mouth piece, all metal with some of the metal covered with plastic, that she had to wear 24 hours each day. The first day that she received it, she showed it to me and I cautioned her on using it because the metal would cause a high electrical field to form in her mouth and disrupt her glands and brain. She felt that she had to correct her TMJ and decided to use the devise anyway. Well, the results were disastrous. She became ill the same day and continued to get worse daily. Weakness, headaches, lack of concentration, loss of recent memory and total fatigue were symptoms that plagued her. Finally, unable to stand it anymore, and with my daily urging, she called the dentist and told him the problem and demanded an appliance made totally of plastic. He complied with her wishes and the symptoms started to disappear the day that she started using the new plastic appliance and within a few days she was her normal self again.

Looking back at my own life, I can now see that I took a tremendous turn for the worst when I had braces applied to my teeth. I wore braces for a year or two before they operated to move my jaw forward to try to correct the TMJ problem. The operation was in the fall of 1983, so the braces would have been applied in 1981 or 1982. I remember the job I had at the time, and how I was always falling asleep. I could hardly put one foot in front of the other, and my mental and emotional state of being was totally chaotic. Too bad I didn't know then what I know now. Adding the metal braces to all that amalgam must have doubled or tripled the electrical field in my mouth. I also had a tremendous gaining of weight during those years. In my opinion metal braces alone are dangerous even if there is no amalgam in the mouth. As soon as the braces are installed they would instantly create a huge EMF in the mouth.

The next personal story is about the trees and shrubs in my courtyard. Some of them had not been doing well for years. After I read about various places in Germany where forests on the side of the hill facing "senders" of electromagnetic pollution (relay systems, radio, radar and satellites) were dying, their leaves and needles having turned brown, and most of them ill; when on the opposite side of the hill (the side sheltered from the "sending frequencies) the trees were green and healthy, I began to look more closely at the condition in my courtyard. Everything in the courtyard was healthy when we moved in. Within six months or so of moving in, my husband and I bought out-door colored lights. These lights went on by an automatic sensor at sunset and stayed on until sunrise the next day. The bulbs were positioned to shine on various objects, including a fountain and various trees, etc. The WIRES carrying the electricity were run next to tree trunks and bushes. I noticed a decline of health in the trees and shrubs about six months later, but did not relate it to the electricity, as I did not, at that time, have the knowledge. For years I treated the trees and bushes with a variety of sprays. In the beginning the sprays were not organic as I was not into that yet. I called the state agriculture department and sent specimens to them for analysis. They gave me their opinion of what was wrong and what spray to use (this was approximately in 1987). I tried what they said diligently, but there was not any improvement. Then, I educated myself on organic yards and turned ours organic. So, for years after that, I treated the bushes and trees organically but still there was not any improvement. Finally, near the end of 1991, I found out about electromagnetic pollution and removed all of the wires running around in the ground and all of the lights. Guess what? The trees and shrubs started to improve!

My last story is about my jewelry. I use to wear a lot of jewelry which I never removed. I wore it day and night, year in and year out. Of course, jewelry is metal. Well, I had my metal fillings removed in January, 1992, and started losing weight in April of that same year. Apparently it took my body three months to recuperate from the EMF bombarding it had been receiving for 30 years. I had lost 10 pounds.

I was thrilled to see the pounds disappear, but it was going very slowly. In June, 1992, I was reviewing my notes for this chapter and realized that if we have electrical meridians running from the tip of our heads to the tip of our toes, then by placing metal jewelry (gold, silver, etc.) around our necks, fingers and wrists, we would be gathering an electrical field around those metallic objects, just as the metal in the teeth did, and thereby interfere with the normal flow of the meridians. Furthermore, the abnormal field generated around the metal could cause disturbances in the body. The effect of which would depend on where the metal was located on the body. So, I decided to test out my theory and remove all of my jewelry. I had to have my wedding ring cut off, as it had not been removed in 12 years. Guess what the outcome was? I am happy to say that I started to lose weight a little more rapidly and I had more energy. As I mentioned earlier, I did wear a lot of jewelry. I had a heavy chain around my neck that held a beautiful cross that I had not removed from my neck in over 16 years. I also wore several rings and had pierced ears which were always filled with an ear ring with a gold base. I had watches and bracelets that I would put on when I went out of the house..

I love jewelry, like most women do, and I still wear it, but I now do so differently. I don't wear any jewelry on my body 24 hours per day. I put jewelry on when I want to wear it for an occasion, and then remove it afterwards. I am not recommending this for everyone, but for my health situation it works best. This theory also applies to metal frames on glasses. It is best to have plastic frames.

Now, to end this chapter I will offer some solutions and protections against electromagnetic pollution. If you want to meter the field in your home, car, office, etc., you need to purchase the TriField Meter. If you don't want to go to the expense of purchasing a TriField Meter, there is another cheaper way to find electrical fields, and that is with a portable radio. The static will locate the field, but you won't know its strength or how far it emanates into the room. Use a small, battery powered portable radio. Set it on AM. Also, set it between stations. Then, go around your walls, etc., and meter them with the radio. When static appears, you have found an electromagnetic field. Remember, you must have a battery operated portable radio, set between stations on AM, with the tuner turned way up. Some fields over one milligauss will be heard as static.

If you can't afford to buy a meter and don't have a radio, just remember a few important things. First of all, your bedroom is the most important room to be free of EMF because you sleep eight hours straight in it and therefore your pineal gland is exposed to any field continuously for that length of time. It is known that EMFs disrupt the pineal. The safest thing would be to sleep on something free of metal. Then, if you did have electricity literally "jumping out of the wall" via a faulty wire, i.e., bad connection, poor insulation, etc., it could not jump to the metal in your bed and therefore interfere with your body all night. To sleep free of metal you should check the frame on your bed and your box spring and mattress. Most frames are made of metal and the coils in the box spring and mattress are made of metal.

Next, remove every appliance from around the bed, and remove all wires that go underneath the bed such as extension cords, etc., keeping them a minimum of three feet from the bed. Alarm clocks are the worst offender and should be on the other side of the room, preferably six feet away (opinions differ on distances). Color television sets should be six to 10 feet away depending on size and lamps at least one to two feet away from your head. For the rest of the house, don't use your microwave or fluorescent lights (discussed under subjects #46, MICROWAVE OVENS and #40, LIGHT INDOOR); unplug any appliance that is not in use. When the washing machine, dryer and dishwasher, et al, is in use, try to stay away from them. All major appliances have a very strong EMF that you should be aware of. Be particularly careful in a baby's room. DO NOT use the "baby phones," those new contraptions that allow you to monitor the baby's room from other rooms, by positioning them on the baby's bed. They give off an EMF that can cause the metal spring in the baby's crib to be electrified. Just the EMF from the appliance is enough to be concerned about. They are wonderful devices to monitor a baby's room so if you desire to use them put them on the other side of the room, away from the baby and the bed. As for solutions, the best one is avoidance. Since that is impossible in some situations, the next best solution is Quantum Products by Unified Technology and Polarizer Technology, companies with technology to defang or mitigate EMF dangers.

Scientifically speaking, Unified Technology has had some studies done with favorable results. From the point of view of usage, I have used both with tremendous success. As a matter of fact, tremendous doesn't cover it, phenomenal success would be a better description.

My first exposure to a solution to EMF came when I read about Unified Technology in the fall of 1991. I purchased one for my home, one for my car, and one for my daughter's computer (she lives in another state). To date, we have been using them since 1991 and I can only rave about the great results that we have had.

Unified Technology was founded by Mark Barlettani. Mark was very generous with his time and afforded me a two hour telephone interview with him. Without giving away the secrets of his technology, he explained the basis of how it worked. He cannot patent the process because it would fall under a "new science patent", and the methodology to do so is exasperating and costly. Furthermore, actual scientific proof of its efficacy does not exist. The proof is in the usage, or the effects produced by the technology. People have real effects from this technology which are sustained by the numerous notarized letters, that the company makes available to the public. The way I understand it, the Coherence Technology(tm) that Unified Technologies invented takes the chaos out of the electricity in the space between the atoms and permanently processes electrons to the highest degree of orderliness. These orderly, coherent electrons are produced by, their technology, at the quantum subatomic level of the least- excited state of the electron.

This process is produced in a variety of plug-in devices and once the device is plugged into the electrical receptacle of your wall (or the cigarette lighter in your car), Coherence Technology(tm) immediately flows throughout the circuitry to your electrical (billing) meter and back again. This creates an extremely high degree of order in the electromagnetic fields that already exist in your home, workplace, etc. It does not eliminate the EMFs, but dramatically improves the quality of the fields and new research proves that it neutralizes the negative effects of electricity and electro-magnetic fields. It makes them more orderly. This, in turn, impacts on the surrounding environment in a very positive and noticeable way. By decreasing the chaos in the electricity and establishing a higher degree of coherence, an optimal balance is created and maintained between order and chaos. This balance effectively neutralizes the potentially harmful effects of electromagnetic radiation. The following information was provided to me by Unified Technologies with permission to use in this book.

Coherence Environmental Systems and Electro-Magnetic Pollution

Dr. Robert Perry and Associates, an independent research group from Fallbrook, California, conducted several tests on a variety of electrical equipment to determine the effectiveness of the Coherence Environmental Systems products. The Pulsar Sensor, or "Spin Tester" was used to detect high and low level electrical intensity and chaos. The 300 HV Tic Tracer measured the degree to which EMR vortexual energy is affecting the energy field surrounding the human body. Dr. Perry and Associates summed up their findings in this way:

In every case the results were as follows;

1. The EMR

 Share

0 Comments


Recommended Comments

There are no comments to display.

Guest
Add a comment...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...